Description
ASP BALLISTIC GEL KIT
CONTENTS:
•
1 x Mould (Packaging Box)
•
1 x Packet containing 1560 gram or 1.56 Kg of ordinance grade gelatine powder.
•
1 x Bottle Preservative (8ml)
•
1 x Set of Instructions
INSTRUCTIONS:
1.
Use a pot with at least 20 Litre capacity.
2.
Fill with 14 Litre of water, for best results use bottled water at room temperature.
3.
Stir gelatine powder into water for 30 minutes, ensuring that no lumps remain.
4.
Let sit for 1 hour.
5.
At this point the contents should have a tick consistency with no excess fluids.
6.
Heat in double cooker(direct heat can be applied to the pot) ensuring that the temperature does not exceed 40° Celsius.
7.
The mixture will become clear as it heats up, once the mixture is completely clear or reaches 40° Celsius turn off the heat.
8.
Stir in the preservative.
9.
Contents can now be poured into the mould (packaging box).
10.
Let cool to room temperature.
11.
Refrigerate for at least 8 hours prior to use.
12.
To ensure accurate results:
Immediately prior to use, the gelatine block is “calibrated” by firing a standard .177 Caliber(4.5mm) steel BB from an air gun over a gun chronograph into the gelatine, and the depth of penetration measured. While the exact calibration methods vary slightly, the calibration method used by the INS National Firearms Unit is typical. It requires a velocity of 183 ±3 m/s (600 ±10 f/s) , and a BB penetration between 8.3 and 9.5 cm ( 3.25 to 3.75 inches).
Re-use instructions:
While only the initial mixture will give 10% ordinance gel, gel can be melted down and re-cast.
To do this follow instructions 6-10





Reviews
There are no reviews yet.